Le Renoir Bridge Assembly
There are 2 steps in building your Renoir Bridge:
1. Assembly of the hand rails.
2. Evenly spacing your planks.
Step 1 - Assembly of the hand rails.
Firstly lay the base rail and the hand rail out on the floor. Line up your first support rail next to the ready prepared holes. Fix
in place using the bolts provided.
Now lay out centre rails (as shown in the diagram) and fix to the first support rail. Now work your way along the bridge
securing the centre rail with the bolts provided.
Outer side of bridge
Stage 2 – Laying out the planks
Firstly place 1 plank at each end of the bridge and screw into bridge base (holes are predrilled to aid assembly).
Place T-Shape plank tight up against vertical all planks tightly together (Fig. 1). The space left over should then be
divided between the planks to get an evenly spaced fixing (Fig. 2). Lay out the balance of the planks using the predrilled holes as
a guide. Fix them securely to the curved base using the screws provided.
Bird's eye view of bridge
|
Why Buy Primrose?
